Tips On How To Extend Smok Pen Recharge Time


Tips On How To Extend Smok Pen Recharge Time

The Smok Pen is really a new pen that was created by two guys in California. They wished to develop a cool writing instrument that appeared as if a genuine pen but had the ability to smoke a hookah. They named their product the Smok Valve and the Smok Pen. The Smok Valve has had the marketplace by storm.

smok pen

The Smok Pen includes a built quality that is just great. I came across that even though it is an electronic pen the construction is just as good as any of the pens that I’ve reviewed. The reason being of how they made the top cap. You don’t need to worry about the cap cracking or breaking you Smok Valve Pen.

Both biggest differences that separate the Smok Valve from other pens is the shape of the coils and the way that they are built. In general the coil on a Smok Pen is larger than on other pens. I believe that they did this on purpose, to help make the pen feel more substantial.

If you take a glance at a Smok Pen, you will notice that the body of the pen is round and not smooth like other pens. On the trunk of the pen there is a little tab that houses the coil. When you press on the tab it is simple to turn the heating element on / off. I really liked this feature because it allows me to use the Smok Pen 22 whenever Personally i think like smoking.

To utilize the Smok Pen you have to keep carefully the heat button pressed. After the button is pressed, the heating element will start to warm up. Once it reaches the appropriate temperature it is possible to turn off the heating element. Smok recommends utilizing a 22mm tank. I prefer a more substantial tank, but that’s just me.

Once you put your Smok Pen into the tank you will notice a indicator light seriously. The Vape Pen indicator light will remain green if you don’t put your Smok Pen into the Smok Pen charger. Once your Smok Pen has entered the charger the indicator light will turn red. It is important to always put your pen into the charger before you apply the e-liquids to the coil heads. It is also important to do this before putting your e-liquids into the coil heads.

After you have completed this step, it is best to check to see for anyone who is at the right temperature for the coils to fire. Or even then you should turn the power off and try again. In case you are still not satisfied with your Smok Pen i quickly suggest you take it in for some troubleshooting. This is what I would call the “troubleshooting process” because sometimes things just do not work as they should. It is suggested that you perform the following two steps, then go ahead and check the Smok Pen to see if it still has the electronic charging port.

Before you go any further you should take away the battery from your own pen and unscrew the magnetic cap. You should then take away the plastic sleeve that holds the sub-ohm. You will find a wire that runs through the Smok’s body which is green in color. You need to loosen this wire using pliers. When you have loosened this wire after that you can access the sub-ohm. You should then take away the wire from the Smok’s body and carefully insert it into the Smok pen’s electrical port, being careful never to touch any of the coils.

After you have placed the sub-ohm tank in to the pen you should then place all of those other components like the wattage, the batteries and the heating element in to the included microwaveable microwave oven. Turn on the power and follow the on screen instructions. You should place the pen’s battery into the microwave and activate the setting. You should then wait approximately 30 seconds before turning it cool off. When you first put the pen into the microwave the electronic reading will show a low voltage protection setting. If this setting does not automatically get set you then should follow the on screen instructions.

Once the Smok Pen has reached the temperature that it requires to reach you should then connect the two wires to the positive and negative on the positive post on the Smok unit. You need to then connect the other end of the battery to the negative post on the negative side of the Smok unit. The ultimate step is to connect the positive cable to underneath of the Smok’s on / off switch.

After all of the components have been placed in to the pen, you should turn the energy on. After the first test run, you ought to be able to start to see the battery life indicator light come on. If you do not see any sign of life from the Smok Pen, you need to remove the battery from the pen and then replace it with a brand new one. For your convenience gleam green light which can be pressed so that you can confirm the battery charging status. If you have done these things and you do not start to see the green light indicating charging, you should replace the battery.